Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

复合推进剂中硝酸铵的改性研究

在分析硝酸铵的多晶现象和吸湿特性的基础上 ,探讨了硝酸铵的改性技术。采用热分析法研究了无机添加剂对硝酸铵晶型转变的影响 ,并用高分子表面处理剂对硝酸铵进行表面处理。结果表明 ,这种方法可以有效地改善硝酸铵的晶体结构和吸湿特性 ,为硝酸铵在复合推进剂中的应用提供了实验和理论依据。     

准陶瓷Cf/SiC复合材料的制备

采用热重-差热(TG-DTA)、红外(IR)等分析测试手段,研究了聚碳硅烷(PCS)的裂解及化学转化过程,从理论上验证了先驱体聚碳硅烷(PCS)600℃裂解产物的准陶瓷特性.先驱体聚碳硅烷在600℃呈现一种半有机、半无机状态,其产物具有准陶瓷的特征,在大约750℃出现无机化转变高峰,固称其为准陶瓷.以碳布、准三维编织体、三维编织体为增强体,采用先驱体浸渍裂解(PIP)工艺在600℃制备了碳纤维增强碳化硅(Cf/SiC)准陶瓷基复合材料.结果表明,以三维编织体增强的准陶瓷Cf/SiC复合材料获得了较理想的结构、性能,所制备3D-Cf/SiC复合材料密度仅有1.27g/cm3,弯曲强度达到193.69MPa,室温拉伸强度为197.69MPa,600℃拉伸强度为167.33MPa.复合材料断口形貌分析表明,在低温600℃制备的准陶瓷Cf/SiC复合材料呈现明显的韧性断裂特征.     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。     

光纤位移传感器在喷油器针阀升程测量中的应用

传统的柴油机喷油器针阀升程测量方式多为接触式.文中提出运用光纤位移传感器进行喷油器针阀升程的测量,重点介绍了光纤位移传感器的原理、测量系统的组成、检测电路的特点等.实践表明,光纤位移传感器在喷油器针阀升程测量中的运用,实现了非接触测量,测量精度大大提高.     

短纤维复合材料的随机微结构力学分析

利用随机介质微观力学方法对纤维大小、方向随机分布的短纤维复合材料弹性模量进行了计算。给出了与微观性能相联系的复合材料弹性模量计算公式。对铝基碳化硅增强短纤维复合材料进行了计算及实验验证。     

一种高精度快速复合轴伺服系统分析─—数字位置差动瞄准线独立控制系统补充分析

本文是数字位置差动瞄准线独立控制系统的补充分析。重点分析了包括在其中的双检测器并联复合轴伺服系统开环和闭环传递函数,从中揭示了复合轴伺服系统高精度的本质。     

基于 ∆TOA 和方位角测量辅以间歇高度信息的双基地定位跟踪技术

本文讨论了双基地雷达系统中一种以收站△TOA和方位角测量为基础并辅以发射站传送的间歇高度信息的运动目标三维定位跟踪算法,详细分析了该技术的定位原理。在电子对抗条件下,发射站数据往往难以连续传送到接收站加以融合,因此有必要对间断传送的数据加以利用的方法进行研究。本文通过典型目标航迹的计算机仿真对该算法的性能做了评估。由于这种融合方法在双基地研究领域尚属初探,因此有待于在今后的研究中加以完善。